关 键 字: 经销FESTO手杆阀 | |
产品规格: | |
所属行业: | 产品包装: |
供货数量: 1 | 产品报价: 0.00 |
发布时间: 2017-10-30 | 有 效 期: 999 |
festo德国*手杆阀技术参数,sncl-63 上海乾拓贸易有限公司企业q电话;021-69001039;(微信)邮箱;@地址:上海市嘉定区江桥嘉涌路99弄6号楼713室vacuum is generated by connecting vacuum generator to port 3 exhaust (or pressurisation) takes place via port 1 in mid-position exhausted the piston can be moved manually;only the frictional forces have to be overcome.in mid-position pressurised, the same pressure is present at ports 2 and 4.the piston is not moved (in the case of flat surfaces).mounting position any direction of flow non-reversible non-overlapping yes exhaust air function with flow control nominal flow rate port at side [l/min.] 600 1150 3200 port underneath [l/min.] 800 1500 3800 nominal width [mm] 6 8 12 pneumatic connection 1, 2, 3, 4 g1/8 g1/4 g1/2 actuating torque at 6 bar [nm] 0.9 2 5operating and environmental conditions connection size g1/8 g1/4 g1/2operating medium compressed air to iso 8573-1:2010 [7:4:4] note on operating/pilot medium lubricated operation possible (can be removed) l (die-cast aluminium) actuator lock none switching position indication via accessories vacuum operation (e.g. suction cup) takes place at port 2 (or 4)valves vher-b43 are suitable for dual-pressure operation.please note that for design reasons compressed air may only be applied to port 1 and 3.-h- note in the case of dual-pressure operation, the higher pressure must always be applied to port 1. supply port: port 1 (high pressure) supply port: port 3 (lower pressure)connection size, pneumatic connectionm5 m5 g18 g1/8 g14 g1/4 g12 g1/2b43c 4/3-way valve, detenting, mid-position closed b43e 4/3-way valve, detenting, mid-position open b43u 4/3-way valve, detenting, mid-position pressurisedconnection direction, pneumatic connectionby sealing port 2 with these valves it is possible to stop single-acting cylinders (3/3-way valve) or double-acting cylinders (4/3-way valve) within the stroke range.in mid-position closed, the drive piston moves until the forces are balanced. the vacuum may only be connected to port 3 to maintain the direction of flow.vacuum operation at port 3: –0.95 … 0 bar-h- note a filter must be installed upstream of valves operated in vacuum mode. this prevents any foreign matter ingeneral technical data connection size g1/8 g1/4 g1/2valve function 4/3-way, detenting, mid-position closed, exhausted or pressurised design rotary slide valve sealing principle hard type of mounting option of front panel mounting or through-holes type of pilot control direct type of actuation manual actuating lever (in which case lubricated operation will always be required) operating pressure [bar] 0 … 10 (vacuum only permitted at port 3) ambient temperature [°c] –20 … +80 temperature of medium [°c] –20 … +80 corrosion resistance class crc1) 2operation with different pressures vacuum operationthe direction of flow of the vher-b43 valves is clearly defined and cannot be reversed.type vher hand lever valve with detentdesign – hand lever, l version p hand lever, polymer versionflexible practical -m- flow 170 … 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised the intake air getting into the valve (e.g. when operating a suction cup).-h- note during vacuum operation, the valve function changes from exhausted (vher-…-b43e-…) to pressurised (vher-…-b43u-…) and vice versa.connections: m5, gx, g?, g? 3/3-way valve hand lever valves vher can be used as 3/3-way valves festo德国*手杆阀技术参数,sncl-63http://slshqiantuo2016.qiugouxinxi.net/
德国P+F传感器,德国SICK传感器,FESTO比例阀,德国FESTO电磁阀
上海乾拓贸易有限公司
地址:上海市嘉定区嘉涌路99弄6号713
技术支持:阿德采购网 深圳市八方通科技开发有限公司
免责声明:阿德采购网对企业信息合法性不承担任何保证责任